0110247GS1001V2-10110247GS1001V2-1
0110247GS1001v2

GRASS SLASHER GS1001v20 1.0m WITH CHAIN AND REAR WHEELS

GS1001v20 HEAVY DUTY GRASS SLASHER WITH CHAINS AND REAR WHEELS WORKING WIDTH 1.0m
Product Weight 170.00 kg | Product Length 1,180.00 mm | Product Width 1,080.00 mm | Product Height 450.00 mm
Base price 1.470,00 €
Base price with tax 1.661,10 €
Sales price without tax 1.425,90 €
Tax amount 185,37 €
1.611,27 €
S1-Multiselect
S1-Multiselect
SHIPPING COST
74.4
SHIPPING COST
S1-Filters
S1-filters
Ask a question about this product
Stock: 2 on-order_sidiros.gif

Grass slasher type GS1001v20.
Specifications:
1. Operating width: 1.0m.
Trapezoidal configuration of the cutter
   a) for extra strength and weight reduction
   b) for a uniform view of the cleared soil after the destruction of the vegetation
   c) for fine shredding of grass.
2. Mounting type: Pre-installed fixed three-point linkage. Slide instead of a bore for the top link pin. Mounting system on the tractor so that the cutter follows the slopes of the ground.
3. Top link pin: A Φ19mm top link pin with a safety is available. Possibility of installation in two positions (depending on the length of the top link).
4. Low link pins: 2 screw low link Φ22mm pins with safety are available. Possibility of screwing facing at the same side for a tractor with narrow arms and for light lateral displacement.
5. Side mount displacement: 100mm. With the ability to shift the mounting, the slasher moves to the right for better cleaning even outside the width of the tractor. NOTE B in the photo.
6. Required power of agricultural tractor: 13HP
7. Construction: Single metal sheet 3mm thick, reinforced with multiple straps. Extra bent reinforcements made of 5 and 8mm for extremely high resistance to stress.
8. Angular gearbox: Transmission ratio 1: 1.92 type Comer LF-205J. Input power at 540rpm: 22KW (30HP). Lubricant type SAE90W. Check the level before use.
9. Cutting tool: Pre-installed 3 pieces of "test" chains 10mm thick.
10. Cutter plate: It has 6 positions (bores) every 60 degrees. Possibility of installing two, three or six chains.
11. Side sleds: Right and left sleds for height adjustment from the ground in two positions. NOTE A in the photo.
12. Height adjustment with wheels: Two wheels for height adjustment of the cutter are included. Height adjustable. NOTE E in the photo. Possibility of rotation for rear or side operation. NOTE D in the photo. Angle adjustment for precise following of ground. NOTE F in the photo. Uniform cleaning and avoidance of stones and soil irregularities. NOTE C in the photo.
   Specifications:
   a) The GS1000W wheel system is intended for installation in a working cutter: 1.00m wide.
   b) Can be installed
     - At the rear if the cutter is mounted on the rear hydraulic system of the tractor
     - At the front if the slasher is mounted on the front hydraulic system of the tractor
   e) Two metal wheels for height adjustment of the cutter are included.
   f) Ability to rotate the wheels for operation
     - back
     - Or on the side in 5 different positions so that the length of the cutter does not increase.
   g) Adjusting the angle for precise follow of the soil and uniform cleaning of the vegetation.
   h) Smart operation to avoid stones and soil irregularities.
   i) Reduces the stress on the tractor hydraulic system. The wheels take up much of the weight of the cutter.
   j) They are made in Greece by the machine shop sidiros.gr. Possibility of sending all over Greece by transport company from Thessaloniki.
13. Outlet of cut grass: Articulated arrangement with doors, covered with rubber. The articulated arrangement with the rear doors and the rubber front minimizes or even eliminates the throwing of grass or other materials.
14. Mounting on a farm tractor with front low links: Possibility to mount the cutter on a farm tractor with hydraulic system and PTO at the front. The mounting tower is moved backwards and the corner group is rotated 180 degrees. This allows another machine (eg milling machine or cultivator) to be mounted on the rear links of the tractor.
15. Possibility to install mounting links for Mitsubishi and other tractors or for mounting on bobcat etc.
16. Cardan shaft: Includes the cardan shaft 23.8X61.3 length L800 with triangular profile tube. It has overrunning clutch for the protection of the gearbox, the shaft, but also the PTO of the tractor. An overrunning clutch is a device that allows the PTO to transmit motion in one direction but rotate freely in the other direction.
17. On request, linkage and PTO for KUBOTA, ISEKI, MITSUBISHI adaptors are available.
18. It is made in Greece by the machine shop sidiros.gr. Possibility of sending all over Greece by transport company from Thessaloniki.


0110247GS1001v2

0110247GS1001v2

SIDIROS