0110247GS1250V2-10110247GS1250V2-1
0110247GS1250v2

GRASS SLASHER GS1250v20 1.25m WITH CHAIN

GS1250v20 HEAVY DUTY GRASS SLASHER WITH CHAINS WORKING WIDTH 1.25m
Product Weight 140.00 kg | Product Length 1,450.00 mm | Product Width 1,330.00 mm | Product Height 450.00 mm
Base price 1.050,00 €
Base price with tax 1.186,50 €
Sales price without tax 1.018,50 €
Tax amount 132,40 €
1.150,90 €
S1-Multiselect
S1-Multiselect
SHIPPING COST
124
SHIPPING COST
S1-Filters
S1-filters
Ask a question about this product
Stock: 0
on-order_sidiros.gif

Grass slasher type GS1250v20.
Specifications:
1. Operation width: 1.25m.
Trapezoidal configuration of the cutter
   -for extra strength and weight reduction
   -for a uniform view of the cleared soil after the destruction of vegetation
   -for fine shredding of grasses.
2. Mounting type: Pre-installed three-point linkage. Extra hold of the chassis with two chains. Mounting system on the tractor so that the cutter follows the slopes of the ground.
3. Top link pin: A Φ19mm top link pin is available safely. Possibility of installation in two positions (depending on the length of the top link).
4. Low link pins: 2 screw low link pins Φ22mm with safety are available. Possibility of screwing facing the same direction for a tractor with narrow low links and for light lateral displacement.
5. Side mounting displacement: 130mm. With the ability to shift the mount, the cutter moves to the right for better cleaning even outside the width of the tractor. NOTE B in the photo.
6. Required power of agricultural tractor: 18HP
7. Construction: Single metal sheet 3mm thick reinforced with multiple straps. Extra bent reinforcements made of 5 and 8mm for extremely high resistance to stress.
8. Angular gearbox: Transmission rati- 1: 1.92 type Comer LF-205J. Input power at 540rpm: 22KW (30HP). Lubricant type SAE90W. Check the level before use.
9. Cutting tool: Pre-installed 3 pieces of "test" chains 10mm thick.
10. Cutter plate: It has 6 positions (bores) every 60 degrees. Possibility of installing two, three or six chains. NOTE A in the photo.
11. Side sleds: Right and left sleds for height adjustment from the ground in tw- positions.
12. Height adjustment with wheels: Two wheels for height adjustment of the cutter are not included. Height adjustable. NOTE E in the photo. Possibility of rotation for rear or side operation. NOTE D in the photo. Angle adjustment for precise ground copying. NOTE F in the photo. Uniform cleaning and avoidance of stones and soil irregularities. NOTE C in the photo.
13. Outlet of cut grass: Articulated arrangement with doors, covered with rubber. The articulated arrangement with the rear doors and the rubber front minimizes or even eliminates the throwing of grass or other materials.
14. Mounting on a farm tractor with front low links: Possibility to mount the cutter on a farm tractor with hydraulic system and PTO at the front. The mounting tower is moved backwards and the gearbox is rotated 180 degrees. This allows another machine (eg milling machine or cultivator) to be mounted on the rear links of the tractor.
15. Possibility to install mounting links for Mitsubishi and other tractors or for mounting on bobcat etc.
16. Cardan shaft: Includes the cardan shaft 27Χ74,6 length L1000 with triangular profile tube. It has an overrunning clutch for the protection of the gearbox, the shaft, but also the PTO of the tractor. An overrunning clutch is a device that allows the PTO to transmit motion in one direction but rotate freely in the other direction.
17. On request, linkage and PTO for KUBOTA, ISEKI, MITSUBISHI adaptors are available.
18. It is made in Greece by the machine shop sidiros.gr. Possibility of sending all over Greece by transport company from Thessaloniki


0110247GS1250v2

0110247GS1250v2

SIDIROS