Pipe coil transporter 3715

Are you a dealer or contractor? Please contact us for availability and final price.

 The Type 3715 Pipe Coil Transported is designed for transporting and laying pipe rolls. It is usually used for polyethylene pipes for water, natural gas, etc. It is a single robust structure that can be towed by a car or a truck, depending on the type of hitch that will be installed.
 It has rollers made of reinforced tube Φ70mm. The rollers have a shaft from end to end, Φ30mm or Φ25mm depending on their position and the stress they receive. They are all galvanized for strong corrosion protection. Finally, their bearings are all closed type sealed with extra seals.
 The roll cage is also galvanized, and it can be fully disassembled, allowing the machine to be transported on a truck without towing. The multiple roller placement positions cover a wide range of large and smaller rolls. As an example, HDPE pipes from Φ63mm to Φ160mm from Fasoplast, Palaplast, etc. can be used. It is recommended to check the compatibility of the characteristics of each manufacturers pipe before using the machine.
 The loading of the rolls can be done either from above or from the back where there is a door. For unwinding the rolls, there is a chain on the central roller for fixing the inner beginning of the roll. For the outside end of the roll, there is a winch with a wire rope so that the conduit passes properly from the output rollers. A central cross tube is also available so that narrow rolls or even two rolls can be loaded. To stabilize the machine during unwinding, there are pegs and parking jacks that lift and stop it.
 The tow bar has a folding support wheel for easier "hooking". It is available with a trailer ball hitch as well as a platform hitch. It has LED rear lights, running lights, brake lights, etc. Does not have any national or European homologation or approval according to EU Regulation for towing on National Road network.

In summary, the technical characteristics are as follows:
1.Payload 1450kg
2.Curb weight 1400kg
3.Possibility of towing
 a.With 2 trailer ball handle (included), for car towing
 b. With swivel hitch (included), for towing by tractor or truck.
4.Roll dimensions
 a.Diameter
  i.maximum 3700mm
  ii. minimum 2000mm
 b.Width
  i.maximum 1500mm
  ii. minimum 600mm
 c.Recommended pipe diameter from Φ63mm to Φ160mm HDPE (depending on type and manufacturer)
5.Roll cage
 a.Galvanized possible to disassemble
 b.Rollers a total of 26 pieces,
  i.Φ70xΦ30x1500 x2pcs,
  ii.Φ70xΦ25x1500 x15pcs,
  iii.Φ70xΦ25x630 x1pc,
  iv.Φ70xΦ25x1000 x4pcs,
  v.Φ70xΦ25x250 x4pcs. Total 26 pcs.
6.Rear led lights
7.Epoxy primer and acrylic paint for strong corrosion protection.
8.Reinforced rubber tires with an outer diameter of Φ900mm, dimensions 11.50x80x15.3, 6 holes with heavy-duty stub axles and galvanized wings.
9.External machine dimensions:
 a.length 6200mm
 b.Width 2305mm
 c.Height 3740mm