0180206155030-2SXISTIKO-SPL60ELTR-3HR-CH-F60X200-V220
0180206155030

SCREWCONE LOG SPLITTER SPL60ELTR 3ΗΡ-CH V220

SCREWCONE LOG SPLITTER SPL60ELTR Φ60Χ200 WITH ELECTRIC MOTOR V220 3ΗΡ-CH WITH 3 POINT LINKAGE
Product Weight 143.00 kg | Product Length 955.00 mm | Product Width 854.00 mm | Product Height 1,340.00 mm
Base price 1.853,00 €
Base price with tax 2.093,89 €
Sales price without tax 1.797,41 €
Tax amount 233,66 €
2.031,07 €
S1-Multiselect
S1-Multiselect
S1-Filters
S1-filters
Ask a question about this product
Stock: 0
on-order_sidiros.gif

 

Screw Cone log splitting machine for dual use with a tractor and a single phase 3HP electric motor. Made in Greece.

1. CONE. Screw cone splitter. Diameter Φ60mm and total length 200mm. Hardened steel for durability. Ideal for difficult log splitting. The code of the cone is 0189000101061.
2. CONICAL ADD. The Conical add is located behind the cone. It helps in easy splitting larger logs. It protects the shaft and bearings. It rises the splitting ability of the screw cone facilitates. The code of the addition is 0189000108035.
3. SHAFT. The torsion resistant shaft’s diameter is Φ40mm. It has PTO Φ35-Z6 for tractor transmission with cardan shaft. There is also a keyway for the V-belt pulley for transmission by electric motor. The shaft has a shoulder to fit in a cone. The material is 4 to 5 times more resistant to torsion compared with common shafts. The code of the shaft is 0189000243530.
4. BEARING. Perforated metal single tube with two bearings which has front and rear seals for sealing and grease for the lubrication of bearings. It can be mounted in three positions of the bench depending on the length of the logs that will split. The code of the bearing is 0180506003600.
5. BLADE SEPARATOR. Protection and separation bade just below the screw cone shaped like a share. Blade separator can be adjusted in accordance with the position of the cone.
6. WORKING BENCH: Length bench 700mm. Bench width 650mm. Bench height without legs 120mm. Single, compact construction of bent sheet metal with reinforcements. The bench can accept customizable short or long legs with wheels and carrying handles. The bench is also customizable for base for electric motor for transmission with V-belt pulleys, electrical panel and emergency switch. It is customizable for gasoline engine’s base and transmission with V-belt pulleys. In the bench can be installed bumper for pulleys. The working bench’s code is 0180506003150.
7. THREE POINT LINKAGE. Two metal sheet arms are attached to the working bench with screws. It has a spigotΦ22mm for the top link, which can be mounted in two positions. It is also supplied with two spigots Φ22mm which can be adapted to three positions each time, inwardly or outwardly. They can remain mounted for combined operation of the tractor and gasoline engine or electric motor. The three point linkage’s code is 0180506002250.
8. LEGS. It has mounted four long legs for stable ground support during operation and easy attachment to the tractor. Leg’s codes 0180506003454, 0180506003457.
9. ELECTRIC MOTOR. It has a high quality 3HP single phase V220 motor at 1450rpm. It is installed on a motor slide with a screw for stretching the V belts.
10. ELECTRICAL PANEL. Main switch, LED voltage and motor protection. In the front part of the working bench there is an emergency switch.
11. V BELT PULLEYS. Two V Belt pulleys for transmission clamped with taper bushes. Achieve the necessary speed reduction from the motor to the correct operation of the cone. Both pulleys are covered with bumpers for the safe operation of the machine. Bumper’s code is 0180506003680.

0180206155030

0180206155030

SIDIROS