STEEL BASE FOR BOLTS FOR SCREWCONE SPLITTER SD50-80B

Cone: Φ80Χ230mm with replacable hardened screw end Φ60Χ170 and a body with Φ42mm bore.
Shaft: Φ50X350mm St37-2
PTO: Available. For use with a tractor
Keyway: Available. For V-belt pulley mounting
Bearing: 3 6210 deep groove ball bearings in a Steel base
Use with a tractor: Suitable for a medium tractor. Extremely reinforced shaft. Extremely durable mounting type.
Use with engine: Recommended RPM reduction, using pulleys (or reducer) at 200 up to 600rpm. Minimum recommended gasoline engine power 16HP. Minimum recommended electric motor power 5.5HP - 1400rpm.

Steel base for screwing on a bench with a total of three (3) bearings 6210 2RS. Two ball bearings are installed forward on the side of the Screwcone and one ball bearing is in the back-side to the PTO. Shaft has very stringent diameter Φ50x350mm with PTO Φ35. There is also a keyway for a pulley (shaft sku 0189000215042). Features manual lubrication presses. It can be screwed to a metal base or a log splitting bench. The SD steel base is much stronger than the pillow blocks type UCP. Screw Cone with replaceable end Φ80x230mm ( Screw cone code 0189000106080).