Cone: Φ105Χ280mm with replacable hardened screw end Φ60Χ170 and a body with Φ42mm bore.
Shaft: Φ50X350mm St37-2
PTO: Not available.
Keyway: Available. For V-belt pulley mounting
Bearing: 3 6210 deep groove ball bearings in a Steel base
Use with engine: Recommended RPM reduction, using pulleys (or reducer) at 200 up to 600rpm. Minimum recommended gasoline engine power 16HP. Minimum recommended electric motor power 7.5HP - 1400rpm. Extremely reinforced shaft. Extremely durable mounting type.
Steel base for screwing on a bench with a total of three (3) bearings 6210 2RS. Two ball bearings are installed forward on the side of the Screwcone and one spherical bearing is in the back-side to. Shaft has very stringent diameter Φ50x260mm with a keyway for a pulley. Features manual lubrication presses. It can be screwed to a metal base or a log splitting bench. The SD steel base is much stronger than the pillow blocks type UCP. Screw Cone with replaceable end Φ105x280mm (Screw cone code 0189000106105).
Our recommendations are entirely optional for the construction. The buyer is responsible for the construction and safety of the machine. For complete split log machines please see here
SD50105Ε,SD50105Ε
SD50105Ε,SD50105Ε
SIDIROS