Reel Trailer for cables or pipes non divided type E26/16-7 compact. Heavy duty and highly durable construction for even the most difficult terrain. Made for unwinding (laying down) cables or pipes in wind farms, oil pipelines or water etc.


Technical characteristics
Operating position:
1. Maximum reel diameter: Φ2600mm
2. Maximum reel width: 1600mm
3. Reel’s central bore: from Φ115 to Φ185 (Shaft C), from Φ95 to Φ125 (Shaft Β) and from Φ76 to Φ110 (Shaft Α)
4. Maximum reel weight: 7000kg

WEBSITEeng Reel Trailer E26-16-7 compact-1

Technical details.

1. Controlled rotational speed of the reel. Counterclockwise rotation possibility for unwinding and clockwise rotation for limited utility of collecting.

  

2. Hydraulic moving of rotating wheels to the reel.

 

3. Hydraulic movement of the foot wheel of the tow bar.

 
As can be seen on the images below, the metallic wheel can be rotated at B’ and C’ postures, respectively.

 

WEBSITEeng Reel Trailer E26-16-7 compact-1b

 

 

4. Six wrenches for the conical reel nuts are used in order to screw the conical nuts of the 3 shafts employed on the reel trailer.

 

5. Shafts A-B-C are the three shafts which employ six nuts. Each time use the proper shaft which suits to the particular reel.

6. Rotary safety on each grip for shaft locking.

WEBSITEeng Reel Trailer E26-16-7 compact-2a

7. During reeling and for reels weighted less than two tones (2000kg), it is possible to lift both front wheels. In this way during operation of the Reel Trailer with small reels, or even without reel at all, you can make maneuvering easier.

  WEBSITEeng Reel Trailer E26-16-7 compact-2b

8. Wheels type 26/8,00-14. Rims with six bores. PR 18. Inflated dimensions, 620mm diameter and 210mm width. According to the manufacturer, it is referenced that each tire can carry 3500kg weight. In addition, each stub axle carrier can bear 4000kg.

9. Adjustable tow bar in six different positions.

 

 10. The two hydraulic cylinders that lift the reel have autonomy handling.

WEBSITEeng Reel Trailer E26-16-7 compact-3b

11. The four wheels are protected with a steel sheet bumper. Each pair of wheels is located on a Libra for better weight distribution and traction even for construction sites with rough terrain.

 

12. Taillights are connected to the towing vehicle.

 

13. Options:

a. Pipe or cable guide

b. Engine type

 

14. Designed and manufactured in EU.

 

15. We are always at your disposal to start from scratch and customize the reel trailer according your needs.


Best Regards,
Sidiropoulos Alexandros
Mechanical Engineer
Tel.: 0030 2463027070
Fax: 0030 2463054722
Mobile: 0030 6948306216