• +30 2312134222 DAILY 09:00-17:00 SATURDAY 09:00-13:00 (UTC+02:00)
  • info@sidiros.gr
0 My Cart
 x 

Your shopping cart is empty!

My Account

  • Log in / Logout
  • Compare Products
  • Checkout

Eshop - Catalog

ScrewCone Splitters
ScrewCones
Φ60mm
Φ80mm
Φ105mm
Parts
Screw cone log splitters
For Tractor Only
For Motor and Tractor
Screw cone sets
For Φ60mm ScrewCone
With keyway for pulley
With keyway for pulley and PTO
For Φ80mm ScrewCone
With keyway for pulley
With keyway for pulley and PTO
For Φ105mm ScrewCone
With keyway for pulley
With keyway for pulley and PTO
Wood Chipper Set
Shafts for ScrewCones
Accessories
Grass cutting
Flail mowers
Grass slashers
Wheel Assembly
Grass Slasher Parts
Laying Equipment
Rollers
Reel Tripods
Reel Shafts
Reel Unwinding
Transmission Parts
Roller Chains
European Series
06Β (3/8” x 7/32”)
08B (1/2” x 5/16”)
10B (5/8” x 3/8”)
12B (3/4” x 7/16”)
16B (1’ x 17.02)
20B (1’1/4” x 3/4”)
24B (1’1/2” x 1’)
28B (1’3/4” x 1’1/4”)
32B (2’ x 1’1/4”)
American Series
06A ASA35 (3/8")
08A ASA40 (1/2")
10A ASA50 (5/8")
12A ASA60 (3/4")
16A ASA80
20A ASA100 (1-1/4)
24A ASA120 (1-1/2)
28A ASA140 (1-3/4)
32A ASA160 2
Single Sprockets
Simplex sprockets
06Β-1 (3/8” x 7/32”)
08B-1 (1/2” x 5/16”)
10B-1 (5/8” x 3/8”)
12B-1 (3/4" x 7/16”)
16B-1 (1’ x 17.02)
20B-1 (1’1/4” x 3/4”)
24B-1 (1’1/2” x 1’)
28B-1 (1’3/4” x 1’1/4”)
32B-1 (2’ x 1’1/4”)
Simplex platewheels
06Β-1 (3/8” x 7/32”)
08B-1 (1/2” x 5/16”)
10B-1 (5/8” x 3/8”)
12B-1 (3/4" x 7/16”)
16B-1 (1’ x 17.02)
20B-1 (1’1/4” x 3/4”)
24B-1 (1’1/2” x 1’)
28B-1 (1’3/4” x 1’1/4”)
32B-1 (2’ x 1’1/4”)
Idler sprockets
06B-1 (3/8” x 7/32”)
08B-1 (1/2” x 5/16”)
10B-1 (5/8” x 3/8”)
12B-1 (3/4" x 7/16”)
16B-1 (1’ x 17.02)
20B-1 (1’1/4’ x 3/4’)
Taper bored sprockets
06B-1 (3/8” x 7/32”)
08B-1 (1/2” x 5/16”)
10B-1 (5/8” x 3/8”)
12B-1 (3/4" x 7/16”)
16B-1 (1’ x 17.02)
20B-1 (1’1/4’ x 3/4’)
Taper bored sprockets with Hardened Teeth
06B-1 (3/8” x 7/32”)
08B-1 (1/2” x 5/16”)
10B-1 (5/8” x 3/8”)
12B-1 (3/4" x 7/16”)
16B-1 (1’ x 17.02)
20B-1 (1’1/4’ x 3/4’)
Duplex Sprockets
Duplex sprockets
06Β-2 (3/8” x 7/32”)
08B-2 (1/2” x 5/16”)
10B-2 (5/8” x 3/8”)
12B-2 (3/4" x 7/16”)
16B-2 (1’ x 17.02)
20B-2 (1’1/4” x 3/4”)
24B-2 (1’1/2” x 1’)
28B-2 (1’3/4” x 1’1/4”)
32B-2 (2’ x 1’1/4”)
Duplex platewheels
06Β-2 (3/8” x 7/32”)
08B-2 (1/2” x 5/16”)
10B-2 (5/8” x 3/8”)
12B-2 (3/4" x 7/16”)
16B-2 (1’ x 17.02)
20B-2 (1’1/4” x 3/4”)
24B-2 (1’1/2” x 1’)
28B-2 (1’3/4” x 1’1/4”)
32B-2 (2’ x 1’1/4”)
Duplex Taper bored sprockets
06B-2 (3/8” x 7/32”)
08B-2 (1/2” x 5/16”)
10B-2 (5/8” x 3/8”)
12B-2 (3/4" x 7/16”)
16B-2 (1’ x 17.02)
20B-2 (1’1/4’ x 3/4’)
Duplex Taper Bored with Hardened Teeth
06B-2 (3/8” x 7/32”)
08B-2 (1/2” x 5/16”)
10B-2 (5/8” x 3/8”)
12B-2 (3/4" x 7/16”)
16B-2 (1’ x 17.02)
20B-2 (1’1/4’ x 3/4’)
Spur gears
Module 1
With side hub
Without hub
Spur racks
Module 1.5
With side hub
Without hub
Spur racks
Module 2
With side hub
Without hub
With hardened teeth
Spur racks
Module 2.5
With side hub
Without hub
With hardened teeth
Spur racks
Module 3
With side hub
Without hub
With hardened teeth
Spur racks
Module 4
With side hub
Without hub
With hardened teeth
Spur racks
Module 5
With side hub
Without hub
With hardened teeth
Spur racks
Module 6
With side hub
Without hub
With hardened teeth
Spur racks
Module 8
With side hub
Without hub
Spur racks
V Belt pulleys
For taper bush
SPA
SPB
SPC
SPZ
With solid hub
SPAM
SPBM
SPCM
SPZM
Tensioners
Steel
Plastic
Couplings
HRC for Taper Bush
HRCP with Pilot Bore
HRCN spiders
GT for taper bush
SG with pilot bore
GT spiders
Taper bushes
1008
1108
1210
1610
1615
2012
2517
3020
3030
3535
Cardan Shafts
Shafts with protection
T1 (16HP 22X54mm)
T2 (21HP 23.8X61.2mm)
T4 (35HP 27X74.6mm)
T5 (47HP 30.2X80mm)
T6 (64HP 30.2X92mm)
Shafts without protection
T1 (16HP 22X54mm)
T2 (21HP 23.8X61.2mm)
T4 (35HP 27X74.6mm)
T5 (47HP 30.2X80mm)
T6 (64HP 30.2X92mm)
T8 (90HP 35X106.5)
Wide Angle Shafts
Yokes
PTO
Triangular Tube
Lemon Tube
Universal joints
Universal joints
Wide Angle Joints
Tubes for Cardan Shafts
Internal
External
Ratchet Torque Limiters
Overrunning Clutches
Shear Bolt Torque Limiters
Friction Torque Limiters
Wide Angle Joints
Double Universal Couplings
Angular Gearboxes
Parts for Angular Gearboxes
Bearings
Groove Ball
Economy Series
6000 Series
Stainless Steel 6000 Series
6200 Series
Stainless Steel 6200 Series
6300 Series
Stainless Steel 6300 Series
6400 Series
6800 Series
6900 Series
600 Miniature Series
16000 Series
62200 Series
62300 Series
Quality Series
6000 Series
6200 Series
6300 Series
6400 Series
600 Miniature Series
62200 Series
Double Row
Self-Aligning
1200 Series
Economy Series
Quality Series
4200 Series
1300 Series
Economy Series
Quality Series
2200 Series
Economy Series
Quality Series
Taper Roller
Economy Series
30200 Series
30300 Series
31300 Series
32000 Series
32200 Series
32300 Series
33100 Series
33200 Series
Quality Series
30200 Series
30300 Series
32000 Series
32200 Series
32300 Series
33100 Series
33200 Series
Inch
Angular Contact
Single Row 7200
Single Row 7300
Double Row 3200
Economy Series
Quality Series
Double Row 3300
Economy Series
Quality Series
Thrust
51100 Series
51200 Series
51300 Series
52200 Series
Spherical Roller Bearings
22200 Series
22300 Series
In Stock
Cylindrical Roller
Taper Roller
Various
Accessories
H Adapter Sleeves
KM Lock Nuts
MB Lock Washers
Pillow Blocks
Economy Series
UC Wide Inner Ring Ball Bearings
UEL Eccentric Collar Wide Ring Bearings
AS One-Side Extended Inner Ring
UCP Pillow Block Units
UCP300 Pillow Block Units
UCF Four-Bolt Flanged Units
UCFL Two-Bolt Flanged Units
UCT Take-Up Pillow Block Units
UCPA Narrow Base Pillow Block Units
UCFC Round Flanged Pillow Block Unit With Centering Hub
UCHA-B Hanger Type Pillow Block Unit
UCFA Rhombus Arc-shaped Bore Units
Quality Series
UC Wide Inner Ring
AS One-Side Extended Inner Ring
UEL Eccentric Wide Inner Ring
AEL Eccentric One-Side Extended Inner Ring
CS Tight Fit Type Bearing
UCP Pillow Block Units
UCF Four-Bolt Flanged Units
UCFL Two-Bolt Flanged Units
PFL Set Housing
PFL Round Housing (3 Bores)
PFL Elliptic Housing (2 Bores)
PFL Triangular Housing (3 Bores)
Thermoplastic
UCP Omega (OP)
OP with Inox Bearing
OP with Regular Bearing
OP without Bearing
UCF Four-Bolt (TT)
TT with Inox Bearing
TT with Regular Bearing
TT without Bearing
UCFL Two-Bolt (VL)
VL with Inox Bearing
VL with Regular Bearing
VL without Bearing
UCT Slide (NT)
NT with Inox Bearing
NT with Regular Bearing
NT without Bearing
UCPA Narrow Width (TBL)
TBL with Inox Bearing
TBL with Regular Bearing
TBL without Bearing
Caps for Housings
Closed Bayonet Cover for TT and VL
Bore Bayonet Cap for TT and VL
Closed Bayonet Cover for NT, OP and U
Bore Bayonet Cap for NT, OP and U
Stainless Steel
UCS Wide Inner Ring Ball Bearings
SB One-Side Extended Inner Ring
UCPS Pillow Block Units
UCFS Four-Bolt Flanged Units
UCFLS Two-Bolt Flanged Units
UCTS Take-Up Pillow Block Units
UCPAS Narrow Base Pillow Block Units
Motors - Pumps
Electric motors
Three phase 1000rpm
Single phase 1400rpm
Three phase 1400rpm
Single phase 2800rpm
Three phase 2800rpm
Flanges for electric motors
Motor Slides
Gasoline engines
With Ignition starter
With recoil starter
Submersible Motors
Submersible Pumps 4'
Pedrollo with 1'1/4" Outlet
Pedrollo with 2' Outlet
Plus with 1'1/4" Outlet
Plus with 2' Outlet
Irrigation
Irrigation Reels
Turbine Shafts
Gears
Impellers - Caps
Accessories
Rollers
Wheels
Variator Pulleys
Ground Speed Gauges
Manual Pumps
Sprinklers
SIME(Italy)
GROUNER
Sprinkler Nozzles
RANGER
SYNKRO
Sprinkler Parts
RANGER
SYNKRO
Irrigation Hoses
Mediumflat 6bar
Extraflat 8bar
Superflat 13-16bar
Layflat Irrigation Reel 18bar
Suction Heavy Duty
Spray Hoses
Water-Air Delivery
Hose Clamps
Heavy Duty
Valves
Brass Gate Valves
Brass Ball Valves M-F
Brass Ball Valves F-F
Bibcock Taps
Flanged Gate Valves
Butterfly Valves
Pipe Fittings
Flanged Water Meters
Lathe Flanges
Elastic Flanges
Blind Lathe Flanges
Threaded Flanges
Welded Elbows
Threaded Pipe Sockets DIN2986
Mild Steel Sockets
Galvanised Sockets
1 External Thread Pipes
2 External Thread Pipes
Tee with 3 External Threads
Hose Connectors
Thread Hose Connectors
Hydrostats
Brass Lift Check Valves
Flanged Lift Check Valves
Aluminium Lift Check Valves
Aluminium Foot Valves
Hydrostat Parts
Plastic Flap Check Valves
Plastic Foot Valves
Pressure Gauges
Bottom Thread
Glycerine Bottom Thread
Rear Thread
Glycerine Rear Thread
With Flange
Pneumatic Bottom Thread
Pneumatic Rear Thread
Vaccum Gauges
Gauge Parts
Perrot
Mouthpieces
For Welding M-F
Plugs M-F
For Hose M-F
Polyethylene HDPE M-F
For Spiral M-F
With External Thread M-F
With Internal Thread M-F
Flanged M-F
Reducer Pipes M-F
Bends M-F
Bends with External Thread
T Bends M-F
Tee with Connector M-F
Tee with External Thread
Tee Bends with External Thread
Key Connectors
Rubber Rings
Bauer
Mouthpieces
For Welding M-F
For Hose M-F
Polyethylene HDPE M-F
Flanged M-F
Key Connectors
Seals
Mechanical Seals
WIDI (Carbitte)
PR/RN Inox
FN (Porcelane)
AG (Porcelain)
T-502
Rubber Seals
Inner Diameter 6 to 10mm
Inner Diameter 11 to 20mm
Inner Diameter 21 to 30mm
Inner Diameter 31 to 40mm
Inner Diameter 41 to 50mm
Inner Diameter 51 to 60mm
Inner Diameter 61 to 70mm
Inner Diameter 71 to 80mm
Inner Diameter 81 to 90mm
Inner Diameter 91 to 100mm
Inner Diameter 101 to 120mm
Inner Diameter 121 to 150mm
Inner Diameter 151 to 200mm
Gearbox Cap Seal
Agricultural Parts
Splines
Male Splines
Female Splines
Adaptors
Top Links
Light Duty
Medium Duty
Ηeavy Duty
Superheavy Duty
Link Ends
Low Link Ends
Top End Links
Low End Hooks
Top End Hooks
Articulated Yokes
Linkage Balls
Kubota-Iseki Assembly
Safety Pins
Hitch Pins
Top Link Pins
Low Link Pins
Trailer/Towing
Swivel Towing Eyes
Wheel Hubs
Tyres & Wheels
Parking Jacks
Metal Wheels
Potato Crop Machinery
Digger Parts
Planter Parts
Harvester Parts
Post Hole Augers
Industrial Products
Galvanised Chains
Steel Chains
Locking Items
Spring Pins DIN1481
Split Pins DIN94
Retaining Rings for Shaft DIN471
Retaining Rings for Bore DIN472
Feather Keys DIN6885
Woodruff Keys DIN6888
Shim Washer Rings DIN988
Metallic Constructions
Furniture
Agricultural Machinery
Pipe Collecting
Potato - Onion
Diggers
Cultivators
Harvesters
Planters
Featured Products
WORKSHOP
0 My Cart
 x 

Your shopping cart is empty!

Sidiros - Μηχανουργείο - Γεωργικά ΜηχανήματαSidiros - Μηχανουργείο - Γεωργικά ΜηχανήματαSidiros - Μηχανουργείο - Γεωργικά Μηχανήματα

logo
ScrewCone Splitters
ScrewCones
Φ60mm
Φ80mm
Φ105mm
Parts
Screw cone log splitters
For Tractor Only
For Motor and Tractor
Screw cone sets
For Φ60mm ScrewCone
With keyway for pulley
With keyway for pulley and PTO
For Φ80mm ScrewCone
With keyway for pulley
With keyway for pulley and PTO
For Φ105mm ScrewCone
With keyway for pulley
With keyway for pulley and PTO
Wood Chipper Set
Shafts for ScrewCones
Accessories

Screw Cone Splitters

Grass cutting
Flail mowers
Grass slashers
Wheel Assembly
Grass Slasher Parts

Cutting

Laying Equipment
Rollers
Reel Tripods
Reel Shafts
Reel Unwinding

Laying

Transmission Parts
Roller Chains
European Series
06Β (3/8” x 7/32”)
08B (1/2” x 5/16”)
10B (5/8” x 3/8”)
12B (3/4” x 7/16”)
16B (1’ x 17.02)
20B (1’1/4” x 3/4”)
24B (1’1/2” x 1’)
28B (1’3/4” x 1’1/4”)
32B (2’ x 1’1/4”)
American Series
06A ASA35 (3/8")
08A ASA40 (1/2")
10A ASA50 (5/8")
12A ASA60 (3/4")
16A ASA80
20A ASA100 (1-1/4)
24A ASA120 (1-1/2)
28A ASA140 (1-3/4)
32A ASA160 2
Single Sprockets
Simplex sprockets
06Β-1 (3/8” x 7/32”)
08B-1 (1/2” x 5/16”)
10B-1 (5/8” x 3/8”)
12B-1 (3/4" x 7/16”)
16B-1 (1’ x 17.02)
20B-1 (1’1/4” x 3/4”)
24B-1 (1’1/2” x 1’)
28B-1 (1’3/4” x 1’1/4”)
32B-1 (2’ x 1’1/4”)
Simplex platewheels
06Β-1 (3/8” x 7/32”)
08B-1 (1/2” x 5/16”)
10B-1 (5/8” x 3/8”)
12B-1 (3/4" x 7/16”)
16B-1 (1’ x 17.02)
20B-1 (1’1/4” x 3/4”)
24B-1 (1’1/2” x 1’)
28B-1 (1’3/4” x 1’1/4”)
32B-1 (2’ x 1’1/4”)
Idler sprockets
06B-1 (3/8” x 7/32”)
08B-1 (1/2” x 5/16”)
10B-1 (5/8” x 3/8”)
12B-1 (3/4" x 7/16”)
16B-1 (1’ x 17.02)
20B-1 (1’1/4’ x 3/4’)
Taper bored sprockets
06B-1 (3/8” x 7/32”)
08B-1 (1/2” x 5/16”)
10B-1 (5/8” x 3/8”)
12B-1 (3/4" x 7/16”)
16B-1 (1’ x 17.02)
20B-1 (1’1/4’ x 3/4’)
Taper bored sprockets with Hardened Teeth
06B-1 (3/8” x 7/32”)
08B-1 (1/2” x 5/16”)
10B-1 (5/8” x 3/8”)
12B-1 (3/4" x 7/16”)
16B-1 (1’ x 17.02)
20B-1 (1’1/4’ x 3/4’)
Duplex Sprockets
Duplex sprockets
06Β-2 (3/8” x 7/32”)
08B-2 (1/2” x 5/16”)
10B-2 (5/8” x 3/8”)
12B-2 (3/4" x 7/16”)
16B-2 (1’ x 17.02)
20B-2 (1’1/4” x 3/4”)
24B-2 (1’1/2” x 1’)
28B-2 (1’3/4” x 1’1/4”)
32B-2 (2’ x 1’1/4”)
Duplex platewheels
06Β-2 (3/8” x 7/32”)
08B-2 (1/2” x 5/16”)
10B-2 (5/8” x 3/8”)
12B-2 (3/4" x 7/16”)
16B-2 (1’ x 17.02)
20B-2 (1’1/4” x 3/4”)
24B-2 (1’1/2” x 1’)
28B-2 (1’3/4” x 1’1/4”)
32B-2 (2’ x 1’1/4”)
Duplex Taper bored sprockets
06B-2 (3/8” x 7/32”)
08B-2 (1/2” x 5/16”)
10B-2 (5/8” x 3/8”)
12B-2 (3/4" x 7/16”)
16B-2 (1’ x 17.02)
20B-2 (1’1/4’ x 3/4’)
Duplex Taper Bored with Hardened Teeth
06B-2 (3/8” x 7/32”)
08B-2 (1/2” x 5/16”)
10B-2 (5/8” x 3/8”)
12B-2 (3/4" x 7/16”)
16B-2 (1’ x 17.02)
20B-2 (1’1/4’ x 3/4’)
Spur gears
Module 1
With side hub
Without hub
Spur racks
Module 1.5
With side hub
Without hub
Spur racks
Module 2
With side hub
Without hub
With hardened teeth
Spur racks
Module 2.5
With side hub
Without hub
With hardened teeth
Spur racks
Module 3
With side hub
Without hub
With hardened teeth
Spur racks
Module 4
With side hub
Without hub
With hardened teeth
Spur racks
Module 5
With side hub
Without hub
With hardened teeth
Spur racks
Module 6
With side hub
Without hub
With hardened teeth
Spur racks
Module 8
With side hub
Without hub
Spur racks
V Belt pulleys
For taper bush
SPA
SPB
SPC
SPZ
With solid hub
SPAM
SPBM
SPCM
SPZM
Tensioners
Steel
Plastic
Couplings
HRC for Taper Bush
HRCP with Pilot Bore
HRCN spiders
GT for taper bush
SG with pilot bore
GT spiders
Taper bushes
1008
1108
1210
1610
1615
2012
2517
3020
3030
3535
Cardan Shafts
Shafts with protection
T1 (16HP 22X54mm)
T2 (21HP 23.8X61.2mm)
T4 (35HP 27X74.6mm)
T5 (47HP 30.2X80mm)
T6 (64HP 30.2X92mm)
Shafts without protection
T1 (16HP 22X54mm)
T2 (21HP 23.8X61.2mm)
T4 (35HP 27X74.6mm)
T5 (47HP 30.2X80mm)
T6 (64HP 30.2X92mm)
T8 (90HP 35X106.5)
Wide Angle Shafts
Yokes
PTO
Triangular Tube
Lemon Tube
Universal joints
Universal joints
Wide Angle Joints
Tubes for Cardan Shafts
Internal
External
Ratchet Torque Limiters
Overrunning Clutches
Shear Bolt Torque Limiters
Friction Torque Limiters
Wide Angle Joints
Double Universal Couplings
Angular Gearboxes
Parts for Angular Gearboxes

Transmission Parts

Bearings
Groove Ball
Economy Series
6000 Series
Stainless Steel 6000 Series
6200 Series
Stainless Steel 6200 Series
6300 Series
Stainless Steel 6300 Series
6400 Series
6800 Series
6900 Series
600 Miniature Series
16000 Series
62200 Series
62300 Series
Quality Series
6000 Series
6200 Series
6300 Series
6400 Series
600 Miniature Series
62200 Series
Double Row
Self-Aligning
1200 Series
Economy Series
Quality Series
4200 Series
1300 Series
Economy Series
Quality Series
2200 Series
Economy Series
Quality Series
Taper Roller
Economy Series
30200 Series
30300 Series
31300 Series
32000 Series
32200 Series
32300 Series
33100 Series
33200 Series
Quality Series
30200 Series
30300 Series
32000 Series
32200 Series
32300 Series
33100 Series
33200 Series
Inch
Angular Contact
Single Row 7200
Single Row 7300
Double Row 3200
Economy Series
Quality Series
Double Row 3300
Economy Series
Quality Series
Thrust
51100 Series
51200 Series
51300 Series
52200 Series
Spherical Roller Bearings
22200 Series
22300 Series
In Stock
Cylindrical Roller
Taper Roller
Various
Accessories
H Adapter Sleeves
KM Lock Nuts
MB Lock Washers

Bearings

Pillow Blocks
Economy Series
UC Wide Inner Ring Ball Bearings
UEL Eccentric Collar Wide Ring Bearings
AS One-Side Extended Inner Ring
UCP Pillow Block Units
UCP300 Pillow Block Units
UCF Four-Bolt Flanged Units
UCFL Two-Bolt Flanged Units
UCT Take-Up Pillow Block Units
UCPA Narrow Base Pillow Block Units
UCFC Round Flanged Pillow Block Unit With Centering Hub
UCHA-B Hanger Type Pillow Block Unit
UCFA Rhombus Arc-shaped Bore Units
Quality Series
UC Wide Inner Ring
AS One-Side Extended Inner Ring
UEL Eccentric Wide Inner Ring
AEL Eccentric One-Side Extended Inner Ring
CS Tight Fit Type Bearing
UCP Pillow Block Units
UCF Four-Bolt Flanged Units
UCFL Two-Bolt Flanged Units
PFL Set Housing
PFL Round Housing (3 Bores)
PFL Elliptic Housing (2 Bores)
PFL Triangular Housing (3 Bores)
Thermoplastic
UCP Omega (OP)
OP with Inox Bearing
OP with Regular Bearing
OP without Bearing
UCF Four-Bolt (TT)
TT with Inox Bearing
TT with Regular Bearing
TT without Bearing
UCFL Two-Bolt (VL)
VL with Inox Bearing
VL with Regular Bearing
VL without Bearing
UCT Slide (NT)
NT with Inox Bearing
NT with Regular Bearing
NT without Bearing
UCPA Narrow Width (TBL)
TBL with Inox Bearing
TBL with Regular Bearing
TBL without Bearing
Caps for Housings
Closed Bayonet Cover for TT and VL
Bore Bayonet Cap for TT and VL
Closed Bayonet Cover for NT, OP and U
Bore Bayonet Cap for NT, OP and U
Stainless Steel
UCS Wide Inner Ring Ball Bearings
SB One-Side Extended Inner Ring
UCPS Pillow Block Units
UCFS Four-Bolt Flanged Units
UCFLS Two-Bolt Flanged Units
UCTS Take-Up Pillow Block Units
UCPAS Narrow Base Pillow Block Units

Pillow Block

Motors - Pumps
Electric motors
Three phase 1000rpm
Single phase 1400rpm
Three phase 1400rpm
Single phase 2800rpm
Three phase 2800rpm
Flanges for electric motors
Motor Slides
Gasoline engines
With Ignition starter
With recoil starter
Submersible Motors
Submersible Pumps 4'
Pedrollo with 1'1/4" Outlet
Pedrollo with 2' Outlet
Plus with 1'1/4" Outlet
Plus with 2' Outlet

Motors

Irrigation
Irrigation Reels
Turbine Shafts
Gears
Impellers - Caps
Accessories
Rollers
Wheels
Variator Pulleys
Ground Speed Gauges
Manual Pumps
Sprinklers
SIME(Italy)
GROUNER
Sprinkler Nozzles
RANGER
SYNKRO
Sprinkler Parts
RANGER
SYNKRO
Irrigation Hoses
Mediumflat 6bar
Extraflat 8bar
Superflat 13-16bar
Layflat Irrigation Reel 18bar
Suction Heavy Duty
Spray Hoses
Water-Air Delivery
Hose Clamps
Heavy Duty
Valves
Brass Gate Valves
Brass Ball Valves M-F
Brass Ball Valves F-F
Bibcock Taps
Flanged Gate Valves
Butterfly Valves
Pipe Fittings
Flanged Water Meters
Lathe Flanges
Elastic Flanges
Blind Lathe Flanges
Threaded Flanges
Welded Elbows
Threaded Pipe Sockets DIN2986
Mild Steel Sockets
Galvanised Sockets
1 External Thread Pipes
2 External Thread Pipes
Tee with 3 External Threads
Hose Connectors
Thread Hose Connectors
Hydrostats
Brass Lift Check Valves
Flanged Lift Check Valves
Aluminium Lift Check Valves
Aluminium Foot Valves
Hydrostat Parts
Plastic Flap Check Valves
Plastic Foot Valves
Pressure Gauges
Bottom Thread
Glycerine Bottom Thread
Rear Thread
Glycerine Rear Thread
With Flange
Pneumatic Bottom Thread
Pneumatic Rear Thread
Vaccum Gauges
Gauge Parts
Perrot
Mouthpieces
For Welding M-F
Plugs M-F
For Hose M-F
Polyethylene HDPE M-F
For Spiral M-F
With External Thread M-F
With Internal Thread M-F
Flanged M-F
Reducer Pipes M-F
Bends M-F
Bends with External Thread
T Bends M-F
Tee with Connector M-F
Tee with External Thread
Tee Bends with External Thread
Key Connectors
Rubber Rings
Bauer
Mouthpieces
For Welding M-F
For Hose M-F
Polyethylene HDPE M-F
Flanged M-F
Key Connectors

Transmission Parts

Seals
Mechanical Seals
WIDI (Carbitte)
PR/RN Inox
FN (Porcelane)
AG (Porcelain)
T-502
Rubber Seals
Inner Diameter 6 to 10mm
Inner Diameter 11 to 20mm
Inner Diameter 21 to 30mm
Inner Diameter 31 to 40mm
Inner Diameter 41 to 50mm
Inner Diameter 51 to 60mm
Inner Diameter 61 to 70mm
Inner Diameter 71 to 80mm
Inner Diameter 81 to 90mm
Inner Diameter 91 to 100mm
Inner Diameter 101 to 120mm
Inner Diameter 121 to 150mm
Inner Diameter 151 to 200mm
Gearbox Cap Seal

Seals

Agricultural Parts
Splines
Male Splines
Female Splines
Adaptors
Top Links
Light Duty
Medium Duty
Ηeavy Duty
Superheavy Duty
Link Ends
Low Link Ends
Top End Links
Low End Hooks
Top End Hooks
Articulated Yokes
Linkage Balls
Kubota-Iseki Assembly
Safety Pins
Hitch Pins
Top Link Pins
Low Link Pins
Trailer/Towing
Swivel Towing Eyes
Wheel Hubs
Tyres & Wheels
Parking Jacks
Metal Wheels
Potato Crop Machinery
Digger Parts
Planter Parts
Harvester Parts
Post Hole Augers

Agricultural Accessories.jpg

Industrial Products
Galvanised Chains
Steel Chains
Locking Items
Spring Pins DIN1481
Split Pins DIN94
Retaining Rings for Shaft DIN471
Retaining Rings for Bore DIN472
Feather Keys DIN6885
Woodruff Keys DIN6888
Shim Washer Rings DIN988
Metallic Constructions
Furniture

Industrial Products

Agricultural Machinery
Pipe Collecting
Potato - Onion
Diggers
Cultivators
Harvesters
Planters
Featured Products

whatsappviber

+306988116355 for mms

Send your Videos and Photos @ Sidiros.


eltacourierlogo  acs logo  speedex courier logo

Αναζήτηση Αποστολής - Tracking


logo


  1. Home
  2. Help for ScrewCones
CodePen - Multi-level Accordion
Are you interested in the purchase of a complete machine or spare parts in order to build it on your own?
I would like to purchase a complete solution for a screwcone log splitting machine.
I would like to split logs on a bench and transmit power from the tractor PTO.
The horse power of the tractor, which I will be splitting logs with, is up to 20ΗΡ.
Without footboard support of the bench on the ground.

Screwcone log splitter for tractors - SPL60TR-0 Φ60Χ170

With two (2) footboard supports in combination with a three point linkage on the tractor.

Screwcone log splitter for tractors - SPL60TR-2 Φ60Χ170

With four (4) footboard supports for easier mount on the tractor.

Screwcone log splitter for tractors - SPL60TR-4 Φ60Χ170

The horse power of the tractor, which I will be splitting logs with, is from 20HP up to 40HP.
I would like to split logs of large diameter.
Without footboard support of the bench on the ground.

Screwcone log splitter for tractors - SPL80TR-0 Φ80Χ230

With two (2) footboard supports in combination with a three point linkage on the tractor.

Screwcone log splitter for tractors - SPL80TR-2 Φ80Χ230

With four (4) footboard supports for easier mount on the tractor.

Screwcone log splitter for tractors - SPL80TR-4 Φ80Χ230

I would like to split logs of small or medium diameter.
Without footboard support of the bench on the ground.

Screwcone log splitter for tractors - SPL60TR-0 Φ60Χ170

With two (2) footboard supports in combination with a three point linkage on the tractor.

Screwcone log splitter for tractors - SPL60TR-2 Φ60Χ17

With four (4) footboard supports for easier mount on the tractor.

Screwcone log splitter for tractors - SPL60TR-4 Φ60Χ170

The horse power of the tractor, which I will be splitting logs with, is 40HP or above.
Without footboard support of the bench on the ground.

Screwcone log splitter for tractors - SPL80TR-0 Φ80Χ230

With two (2) footboard supports in combination with a three point linkage on the tractor.

Screwcone log splitter for tractors - SPL80TR-2 Φ80Χ230

With four (4) footboard supports for easier mount on the tractor.

Screwcone log splitter for tractors - SPL80TR-4 Φ80Χ230

I would like to split large logs which can not be placed on a bench and transmit power from the tractor ΡΤΟ.

Screwcone splitter for big logs for tractors - SPL105TR-1 Φ105Χ280

I would like the log splitter to operate with electricity transmitting power with an electric motor and alternatively to be able to use a tractor PTO.
I have single phase electricity 220Volt.
I would like the log splitter to also have on it the three point linkage of the tractor.
With an electric motor made in China.

Single phase motor log splitter - SPL80ELTR 5.5ΗΡ-CH Φ80Χ260 V220

With an electric motor made in Italy.

Single phase motor log splitter - SPL80ELTR 5.5ΗΡ-ΙΤ Φ80Χ260 V220

I would like the log splitter to not have on it the three point linkage of the tractor.
With an electric motor made in China.

Single phase motor log splitter - SPL80EL 5.5ΗΡ-CH Φ80Χ260 V220

With an electric motor made in Italy.

Single phase motor log splitter - SPL80EL 5.5ΗΡ-ΙΤ Φ80Χ260 V220

I have three phase electricity 380Volt.
I would like an electric motor of 5,5ΗΡ.
I would like the log splitter to also have on it the three point linkage of the tractor.

Single phase motor log splitter - SPL80EL 5.5ΗΡ-CH Φ80Χ260 V220

I would like the log splitter to not have on it the three point linkage of the tractor.

Single phase motor log splitter - SPL80EL 5.5ΗΡ-ΙΤ Φ80Χ260 V220

I would like an electric motor of 7,5ΗΡ.
I would like the log splitter to also have on it the three point linkage of the tractor.

Three phase motor log splitter - SPL80ELTR 7.5ΗΡ-CH Φ80Χ260 V380

I would like the log splitter to not have on it the three point linkage of the tractor.

Three phase motor log splitter - SPL80EL 7.5ΗΡ-CH Φ80Χ260 V380

I would like the the log splitter to operate with a gasoline or diesel motor and alternatively to be able to use the tractor PTO.
Soon available with price. If you would like to see what the machine would look like, it will be like this only it will have a gasoline motor of 16HP.

Three phase motor log splitter - SPL80ELTR 5.5ΗΡ-CH Φ80Χ260 V380

I would like you to supply me with the necessary materials, in order to build my own screwcone log splitting machine. The ScrewCones are suitable for use with tractors, they have counterclockwise thread, which means that when the operator splits firewoods, facing the cone rotates clockwise.
I will transmit power from the tractor PTO but I also want alternatively to be able to adjust a v-belt pulley on the cone shaft for transmission from a motor.
The horse power of the tractor is up to 20HP (at 540rpm).
I would like a cone set with a shaft, pillow blocks and a Φ60mm cone for a more amateur use. Note: the Φ60Χ170mm cones are destined for use with a tractor. The Φ60Χ200mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets - O60mm - With keyway for pulley & PTO

I would like a cone set with a shaft. pillow blocks and a Φ80mm cone for greater productivity. We recommend a cone with a replaceable threaded end. Note: The Φ80Χ230mm cones are destined for use with a tractor. The Φ80Χ260mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets -O80mm - With keyway for pulley & PTO

The horse power of the tractor is from 20ΗΡ up to 40ΗΡ (at 540rpm).
I would like a cone set with a shaft, pillow blocks and a Φ60mm cone for a more amateur use. Note: The Φ60Χ170mm cones are destined for use with a tractor. The Φ60Χ200mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets - O60mm - With keyway for pulley & PTO

I would like a cone set with a shaft, pillow blocks and a Φ80mm cone for greater productivity. We recommend a cone with a replaceable threaded end. Note: The Φ80Χ230mm cones are destined for use with a tractor. The Φ80Χ260mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets - O80mm - With keyway for pulley & PTO

I would like a cone set with a shaft, pillow blocks and a Φ105mm cone for greater productivity and splitting of very large logs. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets - O105mm - With keyway for pulley & PTO

The horse power of the tractor is 40ΗΡ and above (at 540rpm).
I would like a cone set with a shaft, pillow blocks and a Φ80mm cone for greater productivity. We recommend a cone with a replaceable threaded end. Note: The Φ80Χ230mm cones are destined for use with a tractor. The Φ80Χ260mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets - O80mm - With keyway for pulley & PTO

I would like a cone set with a shaft, pillow blocks and a Φ105mm cone for greater productivity and splitting of very large logs. We recommend a cone with a replacebale threaded end. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets - O105mm - With keyway for pulley & PTO

I will transmit power exclusively from an electric motor and I do not require a tractor PTO on the shaft.
The electric motor has a shaft without a reducer and I will be reducing the RPM with v-belt pulleys so that the cone rotates from 200 up to 600 rpm.
The power of the electric motor is up to 4ΗΡ. Note: The Φ60Χ170mm cones are destined for use with a tractor. The Φ60Χ200mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets - O60mm - With keyway for pulley & PTO

The power of the electric motor is higher than 4ΗΡ and up to 7,5ΗΡ.
I would like a cone set with a shaft, pillow blocks and a Φ60mm cone for a more amateur use. Note: The Φ60Χ170mm cones are destined for use with a tractor. The Φ60Χ200mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets -O60mm - With keyway for pulley & PTO

I would like a cone set with a shaft, pillow blocks and a Φ80mm cone fo greater productivity. We recommend a cone with a replaceable threaded end. Note: The Φ80Χ230mm cones are destined for use with a tractor. The Φ80Χ260mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets - O80mm - With keyway for pulley & PTO

The power of the electric motor is more than 7,5ΗΡ.
I would like a cone set with a shaft, pillow blocks and a Φ80mm cone for greater productivity. We recommend a cone with a replaceable threaded end. Note: The Φ80Χ230mm cones are destined for use with a tractor. The Φ80Χ260mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets - O80mm - With keyway for pulley & PTO

I would like a cone set with a shaft, pillow blocks and a Φ105mm cone for greater productivity and splitting of very large logs. We recommend a cone with a replaceable threaded end. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets - O105mm - With keyway for pulley & PTO

The electric motor has a reducer and I will adjust the cone on the reducer shaft. The cone must rotate at 200 up to 600rpm. With less than 200rpm the splitting is done at a relatively slow rate.
The power of the electric motor is up to 4ΗΡ. Note: The Φ60Χ170mm cones are destined for use with a tractor. The Φ60Χ200mm cones are destined for use with a motor and alternatively a tractor. You should choose a Φ60Χ200mm cone from the list. The cone bore can be manufactured in different diameter than the ones available on the list on demand.

Cone - O60mm

The power of the electric motor is higher than 4ΗΡ and up to 7,5ΗΡ.
I would like a Φ60mm cone for a more amateur use. Note: The Φ60Χ170mm cones are destined for use with a tractor. The Φ60Χ200mm cones are destined for use with a motor and alternatively a tractor. You should choose a Φ60Χ200mm cone from the list. The cone bore can be manufactured in different diameter than the ones available on the list on demand.

Cone - O60mm

I would like a Φ80mm cone for greater productivity. We recommend a cone with a replaceable threaded end. Note The Φ80Χ230mm cones are destined for use with a tractor. The Φ80Χ260mm cones are destined for use with a motor and alternatively a tractor. You should choose a Φ80Χ260mm cone from the list. The cone bore can be manufactured in different diameter than the ones available on the list on demand.

Cone - O80mm

The power of the electric motor is more than 7,5ΗΡ.
I would like a Φ80mm cone for greater productivity. We recommend a cone with a replaceable threaded end. Note: The Φ80Χ230mm cones are destined for use with a tractor. The Φ80Χ260mm cones are destined for use with a motor and alternatively a tractor. You should choose a Φ80Χ260mm cone from the list. The cone bore can be manufactured in different diameter than the ones available on the list on demand. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Cone - O80mm

I would like a Φ105mm cone for greater productivity and splitting of very large logs. We recommend a cone with a replaceable threaded end. The cone bore can be manufactured in different diameter than the ones available on the list on demand. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Cone - O105mm

I will transmit power exclusively from a diesel or gasoline motor and I do not require a tractor PTO on the shaft.
The diesel or gasoline motor has a shaft without a reducer and I will be reducing the RPM using v-belt pulleys so that the cone rotates from 200 up to 600rpm.
The power of the diesel or gasoline motor is up to 9ΗΡ. Note: The Φ60Χ170mm cones are destined for use with a tractor. The Φ60Χ200mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets -O60mm - With keyway for pulley

The power of the diesel or gasoline motor is higher than 10ΗΡ and up to 16ΗΡ.
I would like a cone set with a shaft, pillow blocks and a Φ60mm cone for a more amateur use. Note: The Φ60Χ170mm cones are destined for use with a tractor. The Φ60Χ200mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets -O60mm - With keyway for pulley

I would like a cone set with a shaft, pillow blocks and a Φ80mm cone for greater productivity We recommend a cone with a replaceable threaded end. Note: The Φ80Χ230mm cones are destined for use with a tractor. The Φ80Χ260mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets -O80mm - With keyway for pulley

The power of the diesel or gasoline motor is higher than 16ΗΡ.
I would like a cone set with a shaft, pillow blocks and a Φ80mm cone for greater productivity. We recommend a cone with a replaceable threaded end. Note: The Φ80Χ230mm cones are destined for use with a tractor. The Φ80Χ260mm cones are destined for use with a motor and alternatively a tractor. The price of the sets is higher when the shaft and the pillow blocks are reinforced. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets -O80mm - With keyway for pulley

I would like a cone set with a shaft, pillow blocks and a Φ105mm cone for greater productivity and splitting of very large logs. WE recommend a cone with a replaceable threaded end. The price of the sets is higher when the shaft and the pillow blocks are reinforced.

Screw cone sets -O105mm - With keyway for pulley

I will transmit power with an alternative way.
Using a tree planting machine with screw.

Check the rotational direction of the main shaft. Measure the diameter of the shaft the cone will be mounted on. Make sure that you can have from 200 up to 600rpm. The construction can be done on demand. Please contact us.

Using a cultivator.

Check the rotational direction of the main shaft. Measure the diameter of the shaft the cone will be mounted on. Make sure that you can have from 200 up to 600rpm. The construction can be done on demand. Please contact us.

Using an oil motor.

Check the rotational direction of the main shaft. Measure the diameter of the shaft the cone will be mounted on. Make sure that you can have from 200 up to 600rpm. The construction can be done on demand. Please contact us.

  

Contact Information

  • 25is Martiou 154 Ptolemaida Greece 50200
  • +30 2312 134222
  • +30 24630 27070
  • +30 6988116355 Viber - WhatsApp
  • +30 24630 54722
  • info@sidiros.gr
  • http://www.sidiros.gr

Company

  • Contact form
  • Location - Google Map
  • Youtube Channel
  • Facebook Page
  • Work with us

Help - Terms of use

  • Help - Terms of use
  • Installments for card payments
  • Payment
  • Shipping

Product Help

  • FAQ
  • Help for ScrewCones
  • Return Form
Copyright Sidiros.gr © 2022. Designed by Kostas TsampalisGo to top

 

Please publish modules in offcanvas position.

We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies. Read more about our Privacy Policy.

I accept